KTI Networks 10BASE-T Manuale Utente

Installation Guide10BASE-T/100BASE-TX8-Port Dual-Speed HubModel: KF-8DDOC.980329-KF8D-KP/N: 750-0109-001

The power socket for the AC power adapter is located on the rear ofthe hub as shown below:Mounting the HubThe hub can be placed on a desktop as a stan

3. Place the hub against the wall so that the mount bracket fits intothe slot bracket on the back of the hub.4. Slide the hub down until it hangs on t

3. Making Network ConnectionsNetwork Connectors and Rear SwitchThe hub provides 8 dual-speed TP ports. Each can support one con-nection to either a 10

RJ-45 ConnectorsEach of Port #1 to Port #7 provides one RJ-45 connector, which areimplemented as MDI-X jack. An MDI-X jack is designed withinternal cr

Connecting to ComputersThe RJ-45 connectors labeled 1X to 8X can be used for connectingto the network adapter installed in a computer. The network ada

Connecting to HubsThe following table lists the types and the maximum number of hubconnections depending on the configuration switch setting:Configura

Connecting to a Fast Ethernet HubSince the KF-8D is designed to comply with IEEE 802.3u Class IIrepeater specifications, it can support one connection

4. Interpreting LED IndicatorsThe following figure shows the locations of the LED indicators:Power LED: indicates the status of the repeater power sou

Ó 1998 KTI Networks Inc. All rights reserved. No part of this docu-mentation may be reproduced in any form or by any means or used tomake any directi

8-Port Dual-SpeedEthernet/Fast Ethernet HubInstallation GuideDOC.980330-KF8D-NKP/N: 750-0109-002

The information contained in this document is subject to change without prior no-tice.Copyright Ó KTI. All Rights Reserved.TRADEMARKSEthernet is a reg

Table of ContentsChapter 1 IntroductionIntroduction... 1Features ...

1. IntroductionKF-8D dual-speed Fast Ethernet/Ethernet hub is designed to alloweasy and flexible migration from 10Mbps Ethernet to 100MbpsFast Etherne

Features• Complies with IEEE 802.3 and IEEE 802.3u standard forEthernet/Class II Fast Ethernet repeater• Provides a configuration switch (10M/100M/AUT

Dual-speed Hub TechnologyDual-speed hub is designed to support connections with differentspeeds in the same hub. It makes a network planning simpler,

2. InstallationUnpackingCheck to see that you have everything before you start the installation.• Installation guide• The hub unit• One AC power adapt